The MultiSafe DSP 5 is a very versatile voltage tester for all areas of industry and power engineering. With certified CAT IV – 1000 V, it meets the highest safety requirements. The precise two-colour display and the wide voltage range allow it to be used almost anywhere.

Due to its extensive equipment with additional load, continuity test, measuring point illumination and phase sequence test, all functions are combined in the voltage tester.

The voltage tester has a unique safety concept. Tested and certified by VDE, it not only meets the requirements of EN 61243-3 “Voltage testers” but exceeds them. In addition, the voltage tester monitors and protects safety module monitors and protects the DSP 5 and guarantees the highest level of protection for the user.

• nominal voltage range: 0,80 − 1200 V AC / 0,00 − 1500 V DC

• display range with activated load up to 1200 V DC

• continuity tester with measurement 0,01 − 1000 kOhm

• overvoltage category: CAT IV 1000 V

• measuring point lighting

• phase sequence test without earth for IT networks

• additional load for interference voltages and RCD−tripping

• precise display of the voltage 0,3 V bis 1200 V AC / 0,01 to 1500 V DC

• extended test range for low and battery voltages 0,01 to 19,99 V DC

• extremely voltage resistant – CAT IV 1000 V – VDE certified

• large two-colour illuminated display (red/white), for clear warning of hazardous voltages

• clear LED indication for hazardous voltage

• additional load for interference voltages and RCD-tripping

• hold the measured value with the HOLD button

• quick continuity test with sound

• accurate resistance measurement in the range 0,01 kOhm to 1000 kOhm

• green LED for continuity

• phase tester with display “POL” and red LED

• phase sequence tester with LCD and LED display right / left

• controller-monitored testing with error detection to avoid false statements

• additional phase sequence tester without earth for IT networks

• measuring point lighting
  

• slim test electrodes for narrow clamping strips

• one-handed operation when testing sockets

• easy handling

• insulation fault detection through two-colour line insulation

• extremely stable housing, even in cold conditions

• IP 65 – waterproof

• with belt clip on the back

For product information, please call +86-10-83659992